plastic package has underwriters laboratory flam m ability clas s ification 94v-0 glass passivated junction 1500w peak pulse power capability with a 10/1000 s waveform, repetition rate (duty cycle): 0.05% excellent clamping capability low incremental surge resistance fast response time: typically less than 1.0ps from 0 volts to v (br) for uni-directional and 5.0ns for bi-directional types for devices with v(br) 10v,id are typically less than 1.0a high temperature soldering guaranteed:265 / 10 seconds, 0.375"(9.5mm) lead length, 51bs. (2.3kg) tension ca se :jedec DO-201AE, mo lded plastic polarity: color band denotes positive end ( cathode ) except for bidirectional weight: 0.032 ounces, 0.9 grams mounting position: any /w /w 75 r ja typical thermal resistance junction-to-lead typical thermal resistance junction-to-ambient r jl 20 (4) v f =3.5 volt max. for devices of v (br) 200v, and v f =5.0 volt max. for devices of v (br) >200v operating junction and storage temperature range t j , t stg -50---+175 (3) measured of 8.3ms single half sine-w ave or equare w ave, duty cycle=4 pulses per minute maximum (2) mounted on copper pad area of 1.6" x 1.6"(40 x40mm 2 ) per fig. 5 notes: (1) non-repetitive current pules, per fig. 3 and derated above t a =25 per fig. 2 steady state pow er dissipation at t l =75 fffff lead lengths 0.375"(9.5mm) (note 2) p m(av) 6.5 w a v v f peak forw ard surge current, 8.3ms single half ffff sine-w ave superimposed on rated load (jedec method) (note 3) maximum instantaneous forw ard voltage at 100 a for unidirectional only (note 4) i fsm 200.0 3.5/5.0 peak pulse current w ith a 10/1000 s w aveform (note 1) i ppm see table 1 a peak pow er dissipation w ith a 10/1000 s w aveform (note 1, fig.1) p ppm minimum 1500 w breakdown voltage: 6.8 --- 200 v peak pulse power: 1500 w DO-201AE devices for bidirectional applications for bi-directional use c or ca suffix for types 1n6267 thru types 1n6303a (e.g. 1n6267, 1n6303a). electrical characteristics apply in both directions. unit value symbol maximum ratings and characteristics ratings at 25 ambient temperature unless otherwise specified. dimensions in millimeters 1n6267-1n6303a transient voltage suppressor features mechanical data http://www.luguang.cn mail:lge@luguang.cn
min max 1n6267 6.12 7.48 10.0 1n6267a 6.45 7.14 10.0 1n6268 6.75 8.25 10.0 1n6268a 7.13 7.88 10.0 1n6269 7.38 9.02 10.0 1n6269a 7.79 8.61 10.0 1n6270 8.19 10.0 1.0 1n6270a 8.65 9.55 1.0 1n6271 9.0 11.0 1.0 1n6271a 9.5 10.5 1.0 1n6272 9.9 12.1 1.0 1n6272a 10.5 11.6 1.0 1n6273 10.8 13.2 1.0 1n6273a 11.4 12.6 1.0 1n6274 11.7 14.3 1.0 1n6274a 12.4 13.7 1.0 1n6275 13.5 16.5 1.0 1n6275a 14.3 15.8 1.0 1n6276 14.4 17.6 1.0 1n6276a 15.2 16.8 1.0 1n6277 16.2 19.8 1.0 1n6277a 17.1 18.9 1.0 1n6278 18.0 22.0 1.0 1n6278a 19.0 21.0 1.0 1n6279 19.8 24.2 1.0 1n6279a 20.9 23.1 1.0 1n6280 21.6 26.4 1.0 1n6280a 22.8 25.2 1.0 1n6281 24.3 29.7 1.0 1n6281a 25.7 28.4 1.0 1n6282 27.0 33.0 1.0 1n6282a 28.5 31.5 1.0 1n6283 29.7 36.3 1.0 1n6283a 31.4 34.7 1.0 1n6284 32.4 39.6 1.0 1n6284a 34.2 37.8 1.0 1n6285 35.1 42.9 1.0 1n6285a 37.1 41.0 1.0 electrical characteristics at(t a =25 unless otherwise noted) dev ic e ty pe 27.8 53.9 0.100 23.1 16.2 17.1 15.3 18.8 21.8 20.5 19.4 8.55 0.068 0.068 9.72 0.073 0.075 0.075 0.076 14.5 5.0 0.057 0.057 0.061 0.073 0.061 0.065 0.065 0.096 0.089 0.090 0.090 0.092 0.092 0.094 0.094 0.096 37.5 29.1 27.7 40.0 51.5 49.0 30.6 39.1 0.097 43.5 0.097 26.8 1.0 31.4 47.7 0.098 124 16.2 15.6 17.3 109 112 100 103 86.7 13.8 143 128 133 120 200 54.2 1000 500 500 200 1.0 59.5 68.2 96.2 5.0 5.0 50 50 10 10 9.40 5.80 6.05 6.40 6.63 7.02 8.92 7.37 7.78 8.10 10.5 11.7 11.3 12.5 10.8 5.50 1000 139 13.4 15.0 24.3 1.0 1.0 1.0 1.0 34.5 92.6 38.4 12.1 17.8 1.0 47.0 31.9 10.5 10.2 16.7 12.1 1.0 0.078 5.0 78.9 19.0 0.081 5.0 89.8 82.4 18.2 0.081 1.0 45.2 33.2 1.0 25.2 70.8 21.2 63.8 23.5 22.0 0.084 0.084 0.086 12.8 1.0 36.2 41.4 14.5 1.0 56.6 26.5 12.9 1.0 0.088 13.6 1.0 0.098 66.7 22.5 0.086 1.0 43.2 34.7 0.099 28.2 1.0 32.8 45.7 29.1 1.0 28.8 52.0 0.099 31.6 1.0 26.6 56.4 0.100 30.8 1.0 30.1 49.9 breakdow n voltage v (br) (v) (note1) tes t cur r ent at i t (ma) 33.3 1.0 25.6 1.0 11.1 5.0 1.0 stand-off voltage v wm (v) ma x imu m rev er s e leakge at vwm i d (note3)( a ) ma x imu m pea k puls e i ppm(note2) (a) ma x imu m clamping voltage at i ppm v c (v) ma x imu m temperature coefficient of v (br) (%/ ) 1n6267-1n6303a transient voltage suppressor
min max 1n62 86 38.7 47.3 1.0 1n6286a 40.9 45.2 1.0 1n6287 42.3 51.7 1.0 1n6287a 44.7 49.4 1.0 1n6288 45.9 56.1 1.0 1n6288a 48.5 53.6 1.0 1n6289 50.4 61.8 1.0 1n6289a 53.2 58.8 1.0 1n6290 55.8 68.2 1.0 1n6290a 58.9 65.1 1.0 1n6291 61.2 74.8 1.0 1n6291a 64.6 71.4 1.0 1n6292 67.5 82.5 1.0 1n6292a 71.3 78.8 1.0 1n6293 73.8 90.2 1.0 1n6293a 77.9 86.1 1.0 1n6294 81.9 100 1.0 1n6294a 86.5 95.5 1.0 1n6295 90.0 110 1.0 1n6295a 95.0 105 1.0 1n6296 99.0 121 1.0 1n6296a 105 116 1.0 1n6297 108 132 1.0 1n6297a 114 126 1.0 1n6298 117 143 1.0 1n6298a 124 137 1.0 1n6299 136 165 1.0 1n6299a 143 158 1.0 1n6300 144 176 1.0 1n6300a 152 168 1.0 1n6301 153 187 1.0 1n6301a 162 179 1.0 1n6302 162 198 1.0 1n6302a 171 189 1.0 1n6303 180 220 1.0 1n6303a 190 210 1.0 ma x imu m temperature coefficient of v (br) (%/ ) 1.0 stand-off voltage v wm (v) ma x imu m rev er s e leakge at vwm i d (note3)( a ) ma x imu m pea k puls e i ppm(note2) (a) 1.0 5.8 258 ma x imu m clamping voltage at i ppm v c (v) 215 breakdow n voltage v (br) (v) (note1) tes t current at i t (ma) 94.0 1.0 77.8 73.7 60.7 64.1 66.4 70.1 105 1.0 0.108 111 1.0 8.4 179 0.107 173 0.107 0.107 0.107 0.107 1.0 6.1 246 1.0 207 9.1 165 8.0 187 244 0.106 1.0 9.5 158 0.107 1.0 10.9 9.9 152 1.0 1.0 1.0 11.5 5.2 1.0 1. 1.0 0 6.1 1.0 0.104 58.1 1.0 1 6.3 9 2.0 0 .104 55.1 1.0 1 5.3 9 8.0 0.104 53.0 1.0 1 7.6 8 5.0 0 .104 50.2 1.0 1 6.9 8 9.0 1.0 1.0 1.0 1.0 1.0 1.0 6.8 1.0 7.2 8.7 7.0 12.0 131 125 144 10.4 13.9 14.6 12.7 13.3 109 0.106 0.108 0.108 0.105 0.105 0.105 104 118 137 0.108 0.106 0.108 0.108 0.108 0.108 113 1.0 5.5 6.5 6.4 234 287 274 230 219 0.105 0.106 0.106 0.106 162 154 146 81.0 89.2 85.5 97.2 138 102 121 note: for bidirectional use c or ca suffix for types 1n6267 thru types 1n6303a(e.g.1n6267,1n6303a). electrical characteristics apply in both directions. electrical characteristics at(t a =25 unless otherwise noted) device type 171 130 136 128 145 0.101 36.8 1.0 25.3 59.3 0.101 34.8 1.0 2 4.2 6 1.9 0.101 40.2 1.0 23.1 64.8 0.101 38.1 1.0 22.1 67.8 0.102 43.6 1.0 21.4 70.1 0.102 41.3 1.0 20.4 73.5 0.103 47.8 1.0 19.5 77.0 0.103 45.4 1.0 18.6 80.5 1n6267-1n6303a transient voltage suppressor
6.000 1000 10.000 10 1.0 10 100 measured at stand-off voltage, v wm 200 t j =25 f=1.0mh z vsig=50mvp-p measured at zerobias p ppm , peak pulse power, kw current, a p m(av) , strady state power fig.7 -- typical reverse leakage jjjjjjjjjjjjjjjjjj characteristics fig.6 -- maximun non-repetitive forward hhhhhh h surge current unidirectional only c j , junction capacitance, pf fig.5 -- steady state power derating curve t, time, ms fig.1 -- peak pulse power rating curve leakage current, ma dissipation, w v (ba) , breakdown voltage, v i fsm , peak forward surge t o l , pul se width, sec. i d , instantaneous reverse fig.3 -- pulse waveform fig.4 -- typical junction capacitance h hhhhhhhh h unidirectional peak pulse power (p pp ) or current ta , a mbient tempera ture. t l , lea d tempera ture, fig.2 -- pulse derating curve i ppm , peak pulse current, % (i ppm ) derating in percentage, % 10 0.1 1 0.01 0 100 500 t a =25 ?? 100 200 300 400 measured atdevices stand-off voltage, vwm 0.001 1.000 440 150 50 100 0 01 . 02 . 0 tr=10| sec peak value i ppm half value - i ppm 2 pules width (td) is definde as the point where the peak current decays to 50% of i ppm 10/1000| sec. waveform as definde by r.e.a. td v (br) , breakdown voltage, v number of cycles a t 60 hz 100 1.0 10 0.1 0.1 | s1 . 0 | s1 0 | s1 0 0 | s 1ms 10ms non-repetitive pulse waveform shown if fig.3 t a =25 100 75 25 50 0 025 75 50 125 100 150 200 175 1.00 0.75 0.25 0.50 0 025 75 50 200 100 125 150 175 l=0.375"(9.5mm) lead lengths 1.6 x 1.6 x .040" (40 x 40 x 1mm.) copper heat sinks 60 h z resistiveor inductive load 200 100 10 11 0 0 10 t j =t j max. 8.3ms single half sine-mave (jedec method) 3.0 4.0 1n6267-1n6303a transient voltage suppressor ratings and charactieristic curves
|
